Overdrive Comp

The bike industry often sees fads come and go. Innovation doesn’t always assure success or even relevance for that matter. But the 29er revolution seems to be one that’s here to stay and for good reason.

There’s no denying the rock crawling, root crushing power of a larger wheel. Making the largest of obstacles the smallest of matters is a defining trait of these muddy beasts. By offering decreased rolling resistance, increased traction when cornering and improved ground clearance, one ride upon one of these massive behemoths is sure to sway even the staunchest skeptic.

Benefits of a 29” Wheel

  • Angle of Attack – Larger wheels decrease your angle of attack by allowing you to roll over obstacles easier and faster. Bigger wheel = smaller obstacle.
  • Momentum – A larger wheel enables one to carry momentum easier though obstacles.
  • Surface Contact – 29”wheels are less prone to sinking in soft material such as sand and mud due to the larger contact patch causing lower ground pressure. The longer contact patch increases cornering and straight line traction
  • Stability – The relative position of the bottom bracket/cranks to the axles in the wheels also means that your relative center of gravity is lower. This results in a feeling of riding “in” the bike rather than on top of it.
  • Tire Clearance – with more tire choices than any platform, the 29”wheel easily accommodates off road as well as commuting tires.
  • Taller Riders – 29" bikes tend to offer taller riders a more “natural” frame geometry.

The Diamondback Overdrive Comp takes 29ers to a new level. The newly revised 2012 6061-T6 Aluminum Overdrive series frame boasts of newly formed top and down tubes, a machined headtube, and forged drop outs with a replaceable derailleur hanger. The matte finished frame with the gloss colored highlight on the top tube gives the frame a very “super car inspired” look and feel.

The Geometry is spot on. The ever so sloping top tube provides ample standover clearance. A 71° head tube angle and a 73° seat tube angle create the perfect XC/trail geometry. The 390mm (15.4 inch) chainstays equate to an extremely snappy rig and the ability to easily get the front wheel off the ground – something that not all 29ers can be so proud of.

The Rock Shox XC TK-29" w/remote turnkey lockout, gives you 100mm of buttery travel. It also features ext. rebound and compression adjust and 32mm aluminum stanchions.

The Sram X-5 front and rear derailleurs and shifters make the going easy while the SRAM S800 10spd crank set with sealed cartridge bearing bottom bracket and replaceable rings 22/32/44t will give you all of the power you need to make it up and/or down any hill. While coming down you’ll greatly appreciate the Hayes Dyno Sport hydraulic disc brakes (w/ 185mm front / 160mm rear rotors) as they will make stopping a breeze. Add in Weinmann SL-7 M-Series double wall rims with WTB Wolverine Race folding aramid bead and you can ride this bike over pretty much anything. Diamondback signature alloy handlebars, stem post and Race saddle w/tubular cromo rails round out this package.

The 2012 Overdrive Comp is the king of the Overdrive series. Three other models offered in SM (16"), MD (18"), LG (20"), and XL (22") are sure to offer the value and quality that you are looking for in a new 2012 Overdrive 29er.


  • Butted 6061-T6 Aluminum Overdrive 29r Frame
  • RockShox XC32 29, 100mm Fork w/TurnKey Lock Out
  • SRAM X5 10spd shifters, front and rear Derailleurs
  • SL-7 Double Wall Rims
  • Hayes Dyno Sport Hydraulic Disc Brakes

Bike Specs

Sizes 16" Small  18" Medium  20" Large  22" XLarge 
Frame Overdrive 29" Butted 6061-T6 Aluminum w/ Formed Top / Down Tube, machined headtube, forged drop outs w/replaceable hanger, disc only
Fork Rock Shox XC 32, TK-29" w/remote turn key lockout, 100mm travel, ext. rebound, compression adj.
Rear Shock N/A
Cranks SRAM S800 for 10spd, w/ replaceable rings, 44/32/22t
Bottom Bracket Sealed Cartridge
F. Derailleur SRAM X-5 for 10spd, Low clamp, dual pull, 34.9
R. Derailleur SRAM X-5 for 10spd
Shifter SRAM X-5 10spd trigger
Brake Levers Hayes Dyno Sport 2 finger Lever
Brakes Hayes Dyno Sport Hydrualic Disc w/ V7 frt ,V6 rear Rotors
Cassette SRAM PG-1030 10spd Cassette (11-36t)
Rims 32h Weinmann SL-7 Doublewall
Tires WTB Wolverine Comp 29x2.2
Pedals Wellgo Alloy forged, CNC MTB
Handlebar DB Lazer Series 31.8mm low rise
Stem DB AL6061 Ahead 7° 31.8mm
Seatpost DB Lazer Series Micro Adjust 30.9mm
Seat DB Race saddle
Headset Integrated FSA Drop-in ACB upper, Zero Stack lower internal cup and cartridge bearing, 1 1/8"
Colors Grey
Chain Sram PC-1031 10spd
Hubset (F) 32h SL-7 Alloy w/ CNC Disc Mount (R) 32h SL-7 Alloy Cassette w/ CNC Disc mount
Spokes Black 14g Stainless Steel
Grips DB4L 135mm Kraton
Extras DB Key Chain, Owner’s manual, H20 bottle mounts, Clear Coat, 3 extra inches of wheel diameter!
Note Specifications Subject to Change


Size 16" Small 18" Medium 20" Large 22" XLarge
Seat Tube Length ** 16.0" 18.0" 20.0" 22.0"
Standover Height 29.5" 30.0" 31.5" 32.75"
Top Tube Length * 22.0" 23.5" 24.5" 25.5"
Head Tube Length 95.0mm 105.0mm 120.0mm 135.0mm
Head Angle 71.0° 71.0° 71.0° 71.0°
Seat Angle 73.0° 73.0° 73.0° 73.0°
Wheel Base 1062.0mm 1091.0mm 1112.0mm 1131.0mm
Chain Stay Length 440.0mm 440.0mm 440.0mm 440.0mm
Fork Offset 38.0mm 38.0mm 38.0mm 38.0mm
BB Height 313.0mm 313.0mm 313.0mm 313.0mm
Stem Length 70.0mm 70.0mm 90.0mm 90.0mm
Handlebar Width 670.0mm 670.0mm 670.0mm 670.0mm
Crank Length 170.0mm 175.0mm 175.0mm 175.0mm
Seat Post Length 350.0mm 350.0mm 350.0mm 350.0mm
* Measured Horizontally ** Measured from Center

Size Finder

Bike Type


Measurement Units


Based on your input...

Your Bike size is: